Free tool · Troubleshooting
Email app will not connect?
Four things break almost every mail-app setup, and the hostname is rarely one of them. Pick what you are seeing and work down the list — the checks are ordered by how often each one turns out to be the cause.
What happens when you try?
Showing one symptom.
Nothing connects at all
Neither sending nor receiving works, and the app usually says the password is wrong. It very often is not — the account is refusing the password you have, rather than telling you it wants a different one.
1. Use an app password, not your account password
This is the single most common cause, and it applies to most large providers: Gmail, Yahoo Mail, AOL, iCloud Mail, Fastmail, Zoho Mail and Yandex Mail all expect a generated app password in a mail app. Fastmail states plainly that your regular password cannot be used at all. An app password is usually shown once, so if you lost it, delete it and make another.
2. Switch POP or IMAP on in the account first
Some providers ship with mail-app access turned off, so a perfectly correct hostname is refused until you enable it. Microsoft states that for Outlook.com “POP & IMAP access is disabled by default”, and GMX that “POP3/IMAP sync is deactivated by default”. Both are a checkbox in the account’s own settings, not something the app can fix.
3. Check what actually goes in the username box
It is not always your email address, and providers disagree with each other:
- Yandex wants the part before the @, not the whole address.
- iCloud wants the name part for IMAP but the full address for SMTP.
- NetZero wants the bare Member ID — while Juno, its sister service, wants the full address.
- Mailfence authenticates only the primary address on the account.
4. Check the hostname is the one the provider publishes
Hostnames usually follow the imap. / smtp. pattern, and the ones that
do not are exactly where setups fail. GMX sends through
mail.gmx.com — smtp.gmx.com does not exist.
EarthLink uses smtpauth.earthlink.net.
Zoho has a second set of hosts for custom-domain
accounts, and the ordinary pair will not work for them.
Verizon runs on AOL, so its IMAP host is
imap.aol.com while POP and SMTP stay on verizon.net.
The Email Settings Finder will give you the published set for your address.
Mail arrives but will not send
Receiving works, so the account and the password are fine. Everything here is on the outgoing side, which is configured separately and authenticates separately.
1. Tick “outgoing server requires authentication”
Incoming mail always signs in; outgoing does not unless you tell it to, and an un-ticked box is the most common reason send fails while receive works. Different apps word it differently — Require Sign-in, My outgoing server requires authentication, Use same credentials as incoming — and all mean this.
2. Use the port and encryption as a pair
Outgoing mail is usually 465 with SSL or 587 with STARTTLS. Mixing them — 465 with STARTTLS, or 587 with SSL — fails even though both numbers and both methods are individually correct. Use whichever pair your provider publishes; many list one and offer the other as a fallback. More on SMTP ports.
3. If it works on mobile data but not on one Wi-Fi
Then nothing is wrong with your settings. Some networks block outbound port 465, which is why providers offer 587 as an alternative. Try the other port on that network before changing anything else.
4. Check the outgoing host specifically
It is easy to get the incoming host right and the outgoing one wrong, because people fill the second one in from the pattern of the first. See the hostname note under Nothing connects at all — GMX is the usual casualty.
If the app shows a numbered error, SMTP error codes explains what the number means.
Mail vanishes from my other device
Mail arrives on the laptop and is then missing from the phone, or gone from webmail. Nothing has deleted it maliciously: this is POP working exactly as designed.
1. You are on POP, and it is removing mail from the server
POP downloads a message to one device and can then take it off the server, so whichever device checks first wins and the others never see it. The fix is one setting: Delete email from server → Never. Providers’ own setup steps use it — Juno and NetZero both specify it in their Android instructions.
2. Use IMAP instead, if the provider offers it
IMAP keeps every device looking at the same mailbox, so read, filed and deleted mean the same thing everywhere. If your provider publishes an IMAP host, prefer it — this whole symptom disappears.
3. Some providers have no IMAP at all
Juno and NetZero publish POP and SMTP only, so there is nothing to switch to. On those, keep Delete from server: Never and treat webmail as the only place that shows the whole mailbox. Proton Mail is a different case again: its IMAP comes from Proton Mail Bridge running on your own computer, so there is no hostname to enter.
4. Watch the mailbox filling up
Never deleting from the server means nothing is ever cleared automatically. On a small free mailbox, mail eventually stops arriving with no error at all — worth checking in webmail before assuming the settings broke.
The app cannot find the settings
You type the address and password, the app searches, and it either fails or sets up something that does not work.
1. Choose manual setup and pick the protocol yourself
Automatic setup guesses, and for anything outside the largest providers it guesses wrong. Choose manual setup, choose IMAP or POP deliberately, and enter the published hosts and ports. It is three more screens and it works.
2. Some providers publish nothing for it to find
Juno and NetZero have no IMAP record at all, so an app that searches for one finds nothing and gives up. Manual setup with POP is the only route.
3. Mailfence does not publish its ports
Mailfence gives hostnames publicly but not port numbers — yours are in your own account, under Settings › Account › My connection settings. A mail app also needs a paid plan there before any of it works.
4. Start from the published set
The Email Settings Finder takes your address and returns what the provider actually publishes, with a link to the source it came from.
Still stuck?
If none of the four fit, the fastest next step is your provider’s own settings page — every provider hub on this site links to it, with the date we last checked it. Settings do change, and a page that tells you when it was last verified is worth more than one that does not.
One thing to be wary of while searching: older email brands attract fake “support” phone numbers. No provider will ring you about your mailbox or ask for your password or a verification code. More on email security.